 |
|
|
 |
|
| MCC-1 |
|
| The MCC-1 from Green Air Products
is designed to be the central hub for all major
atmospheric and timed functions required in an automated
growth environment. Controls temp, humidity and
CO2 enrichment. |
|
 |
|
|
|
| |
|
|
 |
|
| GHC-4 |
|
| The GHC-4 controllerfrom Green
Air Products is the most powerful and versatile
of all the Green Air Controllers, providing advanced
features - synchronized atmospheric and nutrient
management with remote monitor and data logging
capabilities. |
|
| |
|
|
|
|
|
|
 |
|
| THC-1 |
|
| Control humidity automatically
and accurately with Green Air Products Total Humidity
Controller. The THC-1 switches between humidify
and dehumidify to add or remove atmospheric moisture
as needed. |
|
| |
|
|
|
| |
|
|
 |
|
| CT-DH-3 |
|
| The CT-DH-3 is one of the most
economical and widely used method of controlling
those two very important environmental factors:
temperature and humidity. It was developed by Green
Air Products primarily to be used with CO2 equipment
and exhaust type fans. |
|
| |
|
|
|
|
|
|
 |
|
| Tempstat |
|
| This temp switch from Green Air
Products may be easily converted to control either
heating or cooling equipment by removing the cover
and changing one wire. External coil hydraulic sensor
provides accurate, dependable switching for loads
up to 1/2 hp or 15 amps maximum. |
|
| |
|
|
|
| |
|
|
 |
|
| 24 Hour Timer/Cooling Thermostat |
|
| Perfect for small spaces, the
24-CT-1 from Green Air Products provides an economical
solution for many greenhouse control needs. Great
for small spaces, it is ideal for running a single
light and a single vent fan. Operates on 110 Volt
and capable of switching 15 amps. |
|
| |
|
|
|
|
|
|
 |
|
| Temp-H/C Controller |
|
| The Temp-H/C Temperature Controller
from Green Air Products is switchable between heat
and cool. Designed specifically for the control
of plant growth and related environments. |
|
| |
|
|
|
|
| Green Air Products
CO2 Equipment |
|
|
|
|
 |
|
| CO2 Generators |
|
| Designed by Green Air Products
to maximize CO2 production while minimizing heat,
these generators provide CO2 far more economically
than any other means of enrichment. Easy to connect
to LP tank or existing natural gas lines. |
|
| |
|
|
|
| |
|
|
 |
|
| CO2 Monitor & Control Package |
|
| The Green Air Products CDMC-7
and CDMC-6 CO2 Monitor and Control Packages quickly
pays for itself by providing a method of accurately
and automatically controlling CO2 producing equipment
to ensure exacting and consistent levels. |
|
| |
|
|
|
|
|
|
 |
|
| Cyclestat |
|
| The Cyclestat function timer has
many uses. Only a few of them include: fogging or
misting, spray stakes or drip system timing, air
pumps, CO2 equipment and intake or exhaust fan control.
The Cyclestat may be set for frequency and duration
of timed events. |
|
| |
|
|
|
| |
|
|
 |
|
| Portable CO2 Monitor |
|
| This portable CO2 monitor from
Green Air Products displays both temperature and
CO2 values in ppm. It has a measurement range from
0-2000 ppm. It is perfect for use with the GHC-4.
It can be ordered as part of the CO2 Monitor and
Control Package from Green Air shown above. |
|
| |
|
|
|
|
|
|
 |
|
| Cyclestat IV |
|
| The Cyclestat IV from Green Air
Products has a built-in photosensor to defeat timing
during darkness hours. Photosensor may be switched
on or off as desired. |
|
| |
|
|
|
| |
|
|
 |
|
| Short Cycle Timer |
|
| The CST-1 from Green Air Products
has solved the age old problem of accurate short
cycle timing. The only unit of it’s kind designed
specifically for the control of grow systems. Designed
for use as a CO2 Timer |
|
| |
|
|
|
| Green Air
Products Timers |
|
|
|
|
 |
|
| Green Air 4 Light Timer |
|
| The LT-4 from Green Air Products
is available in either 120 or 240 volt. It Provides
four 5-amp outlet recptacles, each able to power
a 1000 watt grow light. |
|
| |
|
|
|
| |
|
|
 |
|
| Green Air 8 Light Timer |
|
| The LT-8 from Green Air Products
provides eight 5 amp 240 volt outlet receptacles,
each capable of powering up to 1000 watts of grow
lights. Comes in 240 volt only. |
|
| |
|
|
|
|
|
|
 |
|
| 24 Hour Dual Timer |
|
| This Green Air controller features
two independent 24 hour timers in one housing. Each
has a separate power cord & duplex outlet w/
96 non-detachable 15 min trippers. |
|
| |
|
|
|
| |
|
|
 |
|
| 24 Hour Clock Timer |
|
| The TSC-1 timer from Green Air
Products is a 24 hr. time switch that provides accurate
timing with 96 non detachable trippers for On/Off
functions adjustable in 15 Min. increments up to
48 cycles per day. |
|
| |
|
|
|
|
|
|
 |
|
| HydroCycle Timer |
|
New from Green Air Products, this
is a preset irrigation timer - ready for
use with NFT or aeroponic systems. Also great for
drip system timing, air pumps and CO2 equipment. |
|
| |
|
|
|
| |
|
|
 |
|
| TimeStat |
|
| The TimeStat from Green Air Products
is a 24 hr. timer switch that provides accurate
timing with 96 non detachable trippers for On/Off
functions adjustable in 15 Min. increments up to
48 cycles per day. |
|
| |
|
|
|
| Green
Air Products Accessories |
|
|
|
|
 |
|
| Photostat |
|
| The Photostat is used to turn
equipment on only during light periods (day operation)
or during dark periods (night operation.) |
|
| |
|
|
|
| |
|
|
 |
|
| HAR-1 Relay |
|
| Transfer power to large fans
or grow lights requiring high voltage or amp service.
For 110 or 240 V high draw equip. 30 Amp switching
capacity w/ 110V trigger. |
|
| |
|
|
|
|
|
|
 |
|
| HR-1 |
|
| Supply 110 or 240V power to heating
equip. when temperature falls under set point. Built-in
external coil heating thermostat. 30 Amp switching
capacity for heavy load requirements. |
|
| |
|
|
|
| |
|
|
 |
|
| HF-1 Humidity Equipment |
|
| Built in humidifying humidistat.
Use to supply 110 or 240 Volt power to humidifying
equipment when humidity falls below set point. 30
Amp switching capacity for heavy load requirements
|
|
| |
|
|
|
